[chirp_users] testing (daily on FT 2800M)

[Eric Muehlstein]

I was composing a response email to explain that I'd tried it more than 20
times to no avail.  Before hitting send I decided to try it again.  Finally
I got the data to upload to the radio; however, I can't discern anything I
did differently on the final attempt.

On Wed, Aug 17, 2011 at 10:41 PM, Dan Smith <dsmith at danplanet.com> wrote:

> > I just gave the 8/17 build a try on my 2800M also.  I was not able to
> > upload back to the radio.  The terminal output was either "Failed to
> > read echo" or "Radio did not ack ID"
>
> Hmm, I assume you put it into receive mode before you hit the OK button
> on the clone settings dialog box, right?
>
> I recall it being quite a bit more finnicky than most radios... Can you
> guys try it a couple times, rebooting the radio into clone mode and
> putting it back into receive each time before you try? If that works,
> then I might just need to make the clone start code a little more "gentle".
>
> --
> Dan Smith
> www.danplanet.com
> KK7DS
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20110817/117607bd/attachment.html