[chirp_devel] Luiton/Baojie Driver

[Jim Unroe]

Hi Rick,

> Perfect! That's what I was hoping for.

Glad to hear it.

> I am testing your lt725.py mods with
> my Zastone now. It treats the power settings exactly the same; only 1 bit
> for low/high in the map, but low/'mig'/high at the radio. I'm pretty sure
> that the individual channel power settings are ignored on upload, and just
> the bank power level is applied to all.

I do know the programming software (factory and CHIRP) reads and
writes the power levels on a per-channel basis. Programming the
memories via the keypad does too. But if you are in MR mode and change
the power level, it seems to be global.

> I will verify that. Might as well
> leave the individual settings 'settable', since the vendor s/w does that.

I agree. I just gave up on it too easy when I originally worked it up.

> You want me to submit the patch to lt725uv when I'm done testing, or do you
> want to?

You do it. It's your project. My goal was to help you out... not to
take over. ;-)

Jim KC9HI