[chirp_devel] Luiton/Baojie Driver

[Rick DeWitt]

Jim-
Perfect! That's what I was hoping for. I am testing your lt725.py mods 
with my Zastone now. It treats the power settings exactly the same; only 
1 bit for low/high in the map, but low/'mig'/high at the radio. I'm 
pretty sure that the individual channel power settings are ignored on 
upload, and just the bank power level is applied to all. I will verify 
that. Might as well leave the individual settings 'settable', since the 
vendor s/w does that.
You want me to submit the patch to lt725uv when I'm done testing, or do 
you want to?

Rick DeWitt
AA0RD
Sequim, Washington, USA
360-681-3494

On 3/8/2018 8:51 AM, Jim Unroe via chirp_devel wrote:
> Rick,
>
> I did some playing around with the original lt725uv.py driver. It
> should upload and download from/to the Luiton and Baojie radios (plus
> the alias radios).
>
> I went ahead and changed name length to 7. It just won't display on
> the Luiton radio.
>
> Also the Luiton radio has 3 power levels, but I could only find that
> would support 2 power levels via programming software. The factory
> software only allows programming 2 power levels (LOW/HIGH). The memory
> location only supports 2 power levels (it is a single bit). But the
> radios does allow you to choose 3 power levels when programming from
> the keypad (LOW/MIG/HIGH). Yes, MIG is what the radio displays as the
> 3rd power level choice. It was because of this weird implementation
> that I left the settings for the power level off.
>
> I have attached my work as the complete driver so you can load it a a
> module and as a patch. It should give you some ideas for implementing
> the additional radios. I'm pretty sure you added support will work for
> the LT-725UV as well.
>
> Jim
>
>
> _______________________________________________
> chirp_devel mailing list
> chirp_devel at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20180308/a0d7c650/attachment-0001.html