[chirp_devel] Luiton/Baojie Driver

[Rick DeWitt]

Couple of implementation questions-
Your Settings > Extra method didn't 'take' for my model, OK if I move 
that to get_settings?
Can I pull the 'Experimental' warning after testing?
Any problem if I append the model string to MEM_FORMAT for access by the 
browser tab? Shouldn't effect anything....?

Rick DeWitt
AA0RD
Sequim, Washington, USA
360-681-3494

On 3/8/2018 4:43 PM, Jim Unroe wrote:
> Hi Rick,
>
>> Perfect! That's what I was hoping for.
> Glad to hear it.
>
>> I am testing your lt725.py mods with
>> my Zastone now. It treats the power settings exactly the same; only 1 bit
>> for low/high in the map, but low/'mig'/high at the radio. I'm pretty sure
>> that the individual channel power settings are ignored on upload, and just
>> the bank power level is applied to all.
> I do know the programming software (factory and CHIRP) reads and
> writes the power levels on a per-channel basis. Programming the
> memories via the keypad does too. But if you are in MR mode and change
> the power level, it seems to be global.
>
>> I will verify that. Might as well
>> leave the individual settings 'settable', since the vendor s/w does that.
> I agree. I just gave up on it too easy when I originally worked it up.
>
>> You want me to submit the patch to lt725uv when I'm done testing, or do you
>> want to?
> You do it. It's your project. My goal was to help you out... not to
> take over. ;-)
>
> Jim KC9HI