<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Jim-<br>
Perfect! That's what I was hoping for. I am testing your lt725.py
mods with my Zastone now. It treats the power settings exactly the
same; only 1 bit for low/high in the map, but low/'mig'/high at the
radio. I'm pretty sure that the individual channel power settings
are ignored on upload, and just the bank power level is applied to
all. I will verify that. Might as well leave the individual settings
'settable', since the vendor s/w does that. <br>
You want me to submit the patch to lt725uv when I'm done testing, or
do you want to?<br>
<pre class="moz-signature" cols="72">Rick DeWitt
AA0RD
Sequim, Washington, USA
360-681-3494</pre>
<div class="moz-cite-prefix">On 3/8/2018 8:51 AM, Jim Unroe via
chirp_devel wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CADnO8U5=UCwPpmc6cX=CiREdHw5fKjVLJkvY5PYgtc62wZ4xMw@mail.gmail.com">
<pre wrap="">Rick,
I did some playing around with the original lt725uv.py driver. It
should upload and download from/to the Luiton and Baojie radios (plus
the alias radios).
I went ahead and changed name length to 7. It just won't display on
the Luiton radio.
Also the Luiton radio has 3 power levels, but I could only find that
would support 2 power levels via programming software. The factory
software only allows programming 2 power levels (LOW/HIGH). The memory
location only supports 2 power levels (it is a single bit). But the
radios does allow you to choose 3 power levels when programming from
the keypad (LOW/MIG/HIGH). Yes, MIG is what the radio displays as the
3rd power level choice. It was because of this weird implementation
that I left the settings for the power level off.
I have attached my work as the complete driver so you can load it a a
module and as a patch. It should give you some ideas for implementing
the additional radios. I'm pretty sure you added support will work for
the LT-725UV as well.
Jim
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
chirp_devel mailing list
<a class="moz-txt-link-abbreviated" href="mailto:chirp_devel@intrepid.danplanet.com">chirp_devel@intrepid.danplanet.com</a>
<a class="moz-txt-link-freetext" href="http://intrepid.danplanet.com/mailman/listinfo/chirp_devel">http://intrepid.danplanet.com/mailman/listinfo/chirp_devel</a>
Developer docs: <a class="moz-txt-link-freetext" href="http://chirp.danplanet.com/projects/chirp/wiki/Developers">http://chirp.danplanet.com/projects/chirp/wiki/Developers</a></pre>
</blockquote>
<br>
</body>
</html>