[UAT] uTNT 2.0 won't TX

[Josh Keller]

Excellent, that looks like it worked. Maybe something to add as a setting in
the aprs.ini file at some point? I changed the 1 to a 0 in the aprs.c:2178
and recompiled, seems to be working now.

Thanks for the help,
Josh


-----Original Message-----
From: uat-bounces at lists.danplanet.com
[mailto:uat-bounces at lists.danplanet.com] On Behalf Of David Brooke G6GZH
Sent: Saturday, September 28, 2013 15:39
To: Discussion of the Unnamed APRS Tracker
Subject: Re: [UAT] uTNT 2.0 won't TX

Hello Josh,

On Sat, Sep 28, 2013 at 09:49:31AM -0700, Josh Keller wrote:
> 
> Any thoughts on what may be causing this or where to start looking?
> 

I'm not familiar with the TNC you mention, but the aprs program expects
hardware flow control on the TNC serial connection so it may be worth
checking whether your TNC is providing that.

I rebuilt aprs without hardware flow control for my installation since I
couldn't easily get the hardware to provide it.

David

_______________________________________________
UAT mailing list
UAT at lists.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/uat