[drats_users] DRATS SETTINGS FOR ICOM 31

[Kent Hufford]

What are the settings for the ICOM 31 to run DRATS on, from someone who has
done it?

 

thanks,

Kent

KQ4KK

 

***************

Below is the listing for all the other DSTAR radios, except the 9100 and the
31.

 

D-RATS can be configured to operate simultaneously across multiple
communication links, eg: 2m, 70cm, 23cm and the internet.

The options are:

*	Enabled: If enabled, this port is active and available for use with
D-RATS.
*	Port: The device to open. Enter the desired port to operate across
(i.e. "COM14", "/dev/cua0", or "net:ref.d-rats.com:9000").
*	Rate: The data speed used to connect D-RATS to your radio. This must
match your radio (see table below.), but has no bearing on "net:" type
connections such as the Ratflector.


Radio

Rate

Radio settings required for D-RATS to function


IC-80AD

9600

DATATX = AUTO, GPS-TX = OFF, GPS.ATX = OFF


IC-U82

9600

ATX = ATXON, SPD = SPD96


IC-V82

9600

ATX = ATXON, SPD = SPD96


IC-91AD

38400

DV DATA TX = AUTO, GPS TX = DISABLED, GPS AUTO TX = OFF


IC-92AD

38400

DV DATA TX = AUTO, GPS TX = DISABLED, GPS AUTO TX = OFF


IC-2200

9600

ATX = ATXON, SPD = SPD96


IC-2820

9600

DV DATA TX = AUTO, GPS TX = DISABLED, GPS AUTO TX = OFF, UT123 must be
installed


ID-800H

9600

DVT = DVTAT, SPD = SPD96


ID-880H

9600

DATATX = AUTO, GPS-TX = OFF, GPS.ATX = OFF


ID-1

19200

DV DATA TX = AUTO, Cannot use PC application

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/drats_users/attachments/20120113/c5cbaa4b/attachment.html