[chirp_users] Programming assistance

[Bennie Potgieter]

Gooday

Thank you for assisting me,can you assist me in where to fill this in the
field and what field must be empty/cleared?


> [459.375000/+5.000/110.9]
> [459.375000/+5.000/110.9/110.9

Also where or is there a place where I can download an explanation for each
field or colum in the Chirp program like CTCS what and why's

Thank you

On Thu, Feb 1, 2024, 23:21 Bennie Potgieter <potgieterbarends4 at gmail.com>
wrote:

> Hi
>
> Thank you it could be just for listening,I will keep on trying with the
> chirp programming to se wat must be cancelled and what not.
>
> Thank you
>
> On Thu, Feb 1, 2024, 20:11 Jim Unroe <rock.unroe at gmail.com> wrote:
>
>> On Thu, Feb 1, 2024 at 10:02 AM Ken Hansen <ken at n2vip.org> wrote:
>> >
>> > Why are you saying 454.375 MHz? It clearly says 464.375 in the original
>> image...
>>
>> Whoops! I really botched my original reply. The 454.375 is incorrect.
>> It should have been 459.375. The 464.375 is from another radio that
>> (according to the OP) is a repeater. Therefore the frequency displayed
>> is the TX frequency (the repeater's input frequency). It is the RX
>> frequency (the repeater's output frequency) that gets programmed into
>> the CHIRP Frequency field. It would either be higher or lower than the
>> TX frequency. The only repeater listing that I could find by googling
>> had the repeater's TX frequency 5 MHz lower than the input frequency
>> (which is typical for a UHF repeater.
>>
>> > [459.375000/+5.000/110.9]
>> > [459.375000/+5.000/110.9/110.9]
>>
>> But after searching some more today, I see that there are some
>> airports that have 464.375 listed as a repeater. So it could be that
>> the radio was programmed solely to listen to the repeater on 464.375
>> with no intentions to use the repeater, so the programmed channel is
>> simplex with the RX frequency and TX frequency being the same.
>>
>> Jim KC9HI
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to potgieterbarends4 at gmail.com at
>> potgieterbarends4 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> To report this email as off-topic, please email
>> chirp_users-owner at intrepid.danplanet.com
>> Searchable archive:
>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20240202/65d4cfc3/attachment.html