[chirp_users] R-tone and C-tone

[Danny K5CG]

W0OFK on 146.73 (-600KHz) uses 131.8 on both TX and RX 
W0OFK on 444.250 (+5MHz) uses 88.5 on RX only. 

That's how 88.5 was injected into the confusion, it's a different repeater. 

You could use T (tone) with the right frequency for either. C (CTCSS) is optional. 

73 
Danny, K5CG 
HH 550-000-0609 
SKCC 14257 


From: "K0LNY ??" <glenn at ervin.email> 
To: "chirp users" <chirp_users at intrepid.danplanet.com> 
Sent: Thursday, October 12, 2023 1:05:37 PM 
Subject: [chirp_users] R-tone and C-tone 

Hi, 
My local repeater uses 131.8 for a PL tone. 
I at one point had 88.5 in one place and 131.8 in the other. 
So I changed both to 131.8, and it seems that it should still work, but it isn't keying the repeater. 
I'm guessing the R in r-tone is for repeater, and the C in C-tone is CTCSS? 
Anyway, which one of these is the repeater wanting to hear to open up? 
Thanks. 
Glenn 
A man with a clock always knows what time it is. 
A man with two clocks is never sure. 
-- A derivative of Segal's law 

_______________________________________________ 
chirp_users mailing list 
chirp_users at intrepid.danplanet.com 
http://intrepid.danplanet.com/mailman/listinfo/chirp_users 
This message was sent to Danny at k5cg at hamoperator.org 
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 
To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com 
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20231012/453df5cd/attachment.html