[chirp_users] R-tone and C-tone

[Tony Ling]

Your correct setting should be
Tone Mode = TSQL - this sets CTCSS encode and decode.
Tone = 131.8

To my mind, I find CHIRP's CTCSS/DCS configuration very clumsy.
It takes up file columns to describe a very simple concept which could
easily be covered in three columns.

On Thu, 12 Oct 2023 at 19:34, K0LNY ?? <glenn at ervin.email> wrote:

> Hi,
> My local repeater uses 131.8 for a PL tone.
> I at one point had 88.5 in one place and 131.8 in the other.
> So I changed both to 131.8, and it seems that it should still work, but it
> isn't keying the repeater.
> I'm guessing the R in r-tone is for repeater, and the C in C-tone is CTCSS?
> Anyway, which one of these is the repeater wanting to hear to open up?
> Thanks.
>
> Glenn
> A man with a clock always knows what time it is.
> A man with two clocks is never sure.
> -- A derivative of Segal's law
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tony Ling at tonyg7txu at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20231012/0e4a0960/attachment.html