[chirp_users] Problems with Tenway UV 82 Pro

[David Osborne]

This seems to have worked. Thank you for your help with this.

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Sun, May 21, 2023 at 8:21 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, May 21, 2023 at 9:07 PM David Osborne <dosborne1969 at gmail.com>
> wrote:
> >
> > I have tried several different ways to enter the values with no luck.
> Here are the values.
> > QT/DQT Dec is 203.5
> > QT/DQT Enc is 203.5
>
> You don't have to program a receive tone so this will set it up with a
> TX tone only. Receive is using carrier squelch only.
>
> Tone Mode: Tone
> Tone: 203.5  <-- used to set TX CTCSS tone in radio
> Tone Squelch: {blank}
>
> But if you want to set up both RX and TX tones this is how it should be
> set up.
>
> Tone Mode: TSQL
> Tone: {blank}
> Tone Squelch: 203.5  <-- used to set both RX and TX CTCSS tones in radio
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David at dosborne1969 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com



-- 
**David**
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230521/b0bbb69f/attachment.html