[chirp_users] ERROR: Failed to clone: Radio did not respond

[John Groombridge]

I have a Baofeng DR1801
Using Chirp on Windows I can read/write to the radio

Using Kubuntu  22.10, running: python3 
-mchirp.wxui  I get an error message:

WARNING: Unable to select ''
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: Failed to clone: Radio did not respond
Traceback (most recent call last):
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/wxui/clone.py", 
line 66, in run
    self._fn()
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py", 
line 845, in sync_in
    self._mmap = _do_download(self)
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py", 
line 554, in _do_download
    data = _ident_radio(radio)
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py", 
line 549, in _ident_radio
    raise error
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py", 
line 526, in _ident_radio
    data = _do_ident(radio, magic)
  File 
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py", 
line 421, in _do_ident
    raise errors.RadioError("Radio did not respond")

dmesg confirms the cable is connected to ttyUSB0.

Is this a permissions problem?

I have tried: $ sudo usermod -a -G $(stat -c %G 
/dev/ttyUSB0) $USER

What else can I do?
-- 
signature-mini

Kia ora

*JohnG*
_______________________________________________
/using LINUX :: the free open source operating system/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230502/d44d809b/attachment.html