[chirp_users] string error

[K0LNY_Glenn]

I am limited on the systems that I can run chirp next on.
I also have a raspberry pi next to my Kenwood.
I suspect that I cannot connect to it with chirp next over my home network.
So, I'm wondering if chirp next is in the raspberry pi's repository, or if I 
have to try and install it by hand.
Glenn
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Thursday, March 30, 2023 8:17 PM
Subject: Re: [chirp_users] string error


On Thu, Mar 30, 2023 at 8:43 PM K0LNY_Glenn <glenn at ervin.email> wrote:
>
> Hi Jim,
> Here it is for you or anyone else to have a look to see if you can fix it 
> up
> for me.
> It is attached.
> Glenn

Thanks Glenn. You are apparently using classic CHIRP because your CSV
file loads into CHIRP-next without any errors. I assume that this is
because classic CHIRP works better with a screen reader.

The problem is that there are too many fields with no data. There are
many fields in classic CHIRP that cannot be empty. Only "Name",
"Duplex", "Tone", "Skip", "Comment", "URCALL", "RPT1CALL", "RPT2CALL"
and "DVCODE" can have null values. All the rest must contain something
and it must be of the correct type (string, integer, etc).

The easiest way to "fix" your CSV file was to simply load it into
CHIRP-next and then immediately save it back out to a different CSV
file (attached).

Jim KC9HI



--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email 
chirp_users-owner at intrepid.danplanet.com
Searchable archive: 
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com