[chirp_users] string error

[Jim Unroe]

On Thu, Mar 30, 2023 at 8:43 PM K0LNY_Glenn <glenn at ervin.email> wrote:
>
> Hi Jim,
> Here it is for you or anyone else to have a look to see if you can fix it up
> for me.
> It is attached.
> Glenn

Thanks Glenn. You are apparently using classic CHIRP because your CSV
file loads into CHIRP-next without any errors. I assume that this is
because classic CHIRP works better with a screen reader.

The problem is that there are too many fields with no data. There are
many fields in classic CHIRP that cannot be empty. Only "Name",
"Duplex", "Tone", "Skip", "Comment", "URCALL", "RPT1CALL", "RPT2CALL"
and "DVCODE" can have null values. All the rest must contain something
and it must be of the correct type (string, integer, etc).

The easiest way to "fix" your CSV file was to simply load it into
CHIRP-next and then immediately save it back out to a different CSV
file (attached).

Jim KC9HI
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Kenwood2K_3-29-2023-2.csv
Type: text/csv
Size: 22981 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230330/8453ff22/attachment.bin