[chirp_users] Installing Chirp on Linux (Debian based in this case.)

Sat Mar 18 12:25:49 PDT 2023

FYI.

The info at :-
https://chirp.danplanet.com/projects/chirp/wiki/ChirpOnLinux

Is in error regarding adding a user to a group on Debian based systems.

The example terminal command under "Serial port permissions" should be....

*$ sudo adduser $USER dialout*

Note:  Just $USER and no quotes!   The system of couse, will ask for the 
users password.

And then as said, Logout and Log back in again for it to take effect.

This has been checked on Linux Mint, a derivative of Ubuntu, from Debian 
of course.

73.
     Dave G8KBV.

On 18/03/2023 19:00, chirp_users-request at intrepid.danplanet.com wrote:
> Send chirp_users mailing list submissions to
> 	chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> 	chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> 	chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>     1. Chirp On Puppy Linux (John KB2SCS)
>     2. Re: Chirp On Puppy Linux (Jim Unroe)
>     3. Re: Chirp On Puppy Linux (Jeffrey Vian)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 17 Mar 2023 17:04:33 -0400
> From: John KB2SCS<kb2scsjb at gmail.com>
> Subject: [chirp_users] Chirp On Puppy Linux
> To: Chirp<chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CAHBPgZGTs-6gr6yoSzeftMoKji6=449b69WkuVGh2sRvrnoaWA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi All
>           To run the python 2 version of chirp I would download the .tar.gz
> file and extract it to a directory.
> I would then open a terminal window in that directory. Then run Chirp with
> the following command
> Python Chirpw.py
>
> I am trying to run the python 3 version of chirp using the same method.
> My first problem is there is not any chirps.py file to run so I have no
> idea which file is the one I should run.
>
> My question is how do I run the latest version of chirp running the source
> code?
>
> Thank you all for your time in reading this email.
>
> Best regards
> John
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230317/5a4b3221/attachment-0001.html  
>
> ------------------------------
>
> Message: 2
> Date: Fri, 17 Mar 2023 17:43:10 -0400
> From: Jim Unroe<rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Chirp On Puppy Linux
> To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CADnO8U7TrTD7OdmcaY8tSLcuECrhncx9A34VBi5hnFB80gWx_A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> On Fri, Mar 17, 2023 at 5:06?PM John KB2SCS<kb2scsjb at gmail.com>  wrote:
>> Hi All
>>           To run the python 2 version of chirp I would download the .tar.gz file and extract it to a directory.
>> I would then open a terminal window in that directory. Then run Chirp with the following command
>> Python Chirpw.py
>>
>> I am trying to run the python 3 version of chirp using the same method.
>> My first problem is there is not any chirps.py file to run so I have no idea which file is the one I should run.
>>
>> My question is how do I run the latest version of chirp running the source code?
>>
>> Thank you all for your time in reading this email.
>>
>> Best regards
>> John
> Have you looked at the "Running CHIRP on Linux" wiki page? I believe
> it will answer some of your questions.
> https://chirp.danplanet.com/projects/chirp/wiki/ChirpOnLinux
>
> Jim KC9HI
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 17 Mar 2023 20:51:30 -0500
> From: Jeffrey Vian<sandhillsinvestment at gmail.com>
> Subject: Re: [chirp_users] Chirp On Puppy Linux
> To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com>
> Message-ID:
> 	<CA+hWPZe5jrDBN01OZL==0ThYpUe4+0mbm+KgS5NeFyBeZQeyLg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> You install and run it differently since chirp-next is actually a python3
> build.
>
> I installed python3-pip, then as my user I installed chirp-next as my
> regular user using pip.
> Will need to check my notes and verify the steps on  a new clean install of
> Fedora 37 and Chirp-next.  (you did not note the OS you are running, but I
> assume it is linux.)
>
> However, if you install it with pip as a regular user it is installed under
> /home/USER/.local/ and the executable is ~/.local/bin/chirp.
> You will need to install (using pip) the wheel and wxpython and attrdict3
> packages, but I don't remember what all else is required.  This is why I
> need to repeat the clean install and verify my notes.
>
> It runs in a venv if installed in that manner so nothing else is needed to
> run it.  Check your $PATH and if it includes ~/.local/bin then the command
> 'chirp' is all that will be required.
>
> Jeff
> KI7GJG
>
>
>
> On Fri, Mar 17, 2023 at 4:05?PM John KB2SCS<kb2scsjb at gmail.com>  wrote:
>
>> Hi All
>>           To run the python 2 version of chirp I would download the .tar.gz
>> file and extract it to a directory.
>> I would then open a terminal window in that directory. Then run Chirp with
>> the following command
>> Python Chirpw.py
>>
>> I am trying to run the python 3 version of chirp using the same method.
>> My first problem is there is not any chirps.py file to run so I have no
>> idea which file is the one I should run.
>>
>> My question is how do I run the latest version of chirp running the source
>> code?
>>
>> Thank you all for your time in reading this email.
>>
>> Best regards
>> John
>>
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent tosandhillsinvestment at gmail.com  at
>> sandhillsinvestment at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> To report this email as off-topic, please email
>> chirp_users-owner at intrepid.danplanet.com
>> Searchable archive:
>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230317/b5382252/attachment-0001.html  
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email tochirp_users-unsubscribe at intrepid.danplanet.com
>
> End of chirp_users Digest, Vol 171, Issue 15
> ********************************************

-- 
Created on and sent from a Unix like PC running and using free and open source software:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230318/d30413f9/attachment.html 