[chirp_users] Support of radio

[Jeffrey Vian]

Yes, it is a known good cable.  Used on another baofeng recently.
I have tried all the baofeng models and radioditty models.
For some it says
Error reading data from radio: Not the amount of data we want.
or it says
Clone failed: Radio did not ack the programming mode.
or it says (for most)
Clone failed: Radio did not respond.

I was running chirp launched from the command line so I have the messages,
but it does not always show which driver/model was being tried.

The messages are similar regardless of using chirp legacy (flatpak) or
chirp-next.

Sorry, but I noticed that I forgot to show that I am using linux (Fedora 37
with python 3.11) for chirp-next released 20230309 or the legacy flatpak
20221217
Jeff
KI7GJG



On Fri, Mar 10, 2023 at 3:52 PM Ken Hansen <ken at n2vip.org> wrote:

> I see three models of UV-82 (UV-82, UV-82HP, UV-82WP), I assume you tried
> all 3, correct?
>
> What does chirp do when you try to read the radio? What is the error
> message?
>
> Is this a known-good programming cable?
>
> Are you certain the radio isn't receiving a signal while trying to read
> from it? (Remove antenna, choose a 'quiet' channel, etc)
>
> Ken, N2VIP
>
> > On Mar 10, 2023, at 15:39, Jeffrey Vian <sandhillsinvestment at gmail.com>
> wrote:
> >
> > 
> > I have a new baofeng that was just given to me.
> > The radio is UV-82L and was purchased by my ARC 2 or 3 years ago and
> programmed using chirp at that time.
> >
> > I wanted to update the programming but have  not been able to do so with
> either chirp-next or the legacy chirp that is on the download site.
> >
> > The individual that originally programmed it does not remember which
> type of radio he used for the original programming.
> >
> > So far I have tried every supported baofeng model and the radioddity
> models as well but none are able to download the existing programming so it
> could be modified and updated.
> >
> > Does anyone have a clue if chirp is even able to communicate with this
> radio today? and if so then what brand/model should be used to do so?  The
> club still has several of these that are used as door prizes and for club
> use.
> >
> > Jeff
> > KI7GJG
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Ken Hansen at ken at n2vip.org
> > To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> > To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> > Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to sandhillsinvestment at gmail.com at
> sandhillsinvestment at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230310/804a22aa/attachment.html