[chirp_users] Yaesu FT-65 No upload, not a CSV tab issue - Download OK

Jim Unroe
Sat Jul 29 11:09:01 PDT 2023

On Sat, Jul 29, 2023 at 1:11 PM Peter.jay12 via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I’ve scanned several monthly archives for "FT-65" and separately for  “upload”.  The only reports I can find is that users are trying to upload a CSV tab (a common problem) and not the tab downloaded from the radio.  I’ve added my channels to the FT-65 download tab and still no joy uploading.  Im using a Mac OS Ventura 13.5 and an RTsystems (ZRT-USB-55) with current drivers (verified with tech support) working in the Mac.  Chirp downloads from the radio without any issue.  I see both TX and RX displayed on the radio and CLONE OK but no changes are made to the memory locations.   I’ve reset the radio to factory defaults and made only a single change to a memory channel in Chirp to limit any input error without success.  Probably something simple but I just don’t see it.  Any thoughts?

You don't/can't upload a CSV tab directly into a radio. You have to
download from the radio to create a tab that is compatible with the
radio and then load the CSV file to create a second tab.
Copy-and-paste the memory rows from the CSV tab to the FT-65 tab.
Finally upload the FT-65 tab back into the radio.


More information about the chirp_users mailing list