[chirp_users] Can't connect to BTECH UV-25X2-Gen2

John Oliver
Sun Jul 16 10:33:18 PDT 2023


Great Googly Moogly...

On Sun, Jul 16, 2023 at 10:31 AM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, Jul 16, 2023 at 1:10 PM John Oliver <jnojr1 at gmail.com> wrote:
> >
> > They are :-)  The Y cable that came with the radio has RJ45 for the mic,
> and two different size jacks.  It looks exactly like the two different size
> jacks on the cable for my other Baofeng, and that cable snaps in.  I
> literally cannot plug the data jack into the smaller jack... it is too big.
> The Y cable that came with the radio is for being able to plug a
> typical Kenwood 2-pin style speaker/mic or an APRS cable into the
> radio to be used instead of the mic that comes with the radio. It is
> not for programming the radio.
> Again. The DATA port is on the back of the radio next to the fan. It
> is labeled "DATA" above the port. Only this port can be used for
> programming.
> > And the CIRP I'm running is "CHIRP next-20230712 on Python 3.8.10
> wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4"
> Then you should see the "debug" selections in the drop down "Help" menu.
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John Oliver at jnojr1 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230716/4922f3c3/attachment.html 

More information about the chirp_users mailing list