[chirp_users] Query RepeaterBook - Limit Band option only lists 10m band

[Nicolas Pike]

I will investigate the band plans.
Thanks
Nicolas

On Mon, 16 Jan 2023 at 16:46, Dan Smith via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> > Query RepeaterBook - Limit Band option only lists the 10m band.
> > Am I missing something obvious? If not I can investigate further.
>
> I build the list by looking at the bandplan and including any whole bands
> that are named "XX Meter Band" above 27MHz. So look at your bandplan object
> and either fix the names so they match, or add them if they're missing.
>
> > Freq Step is always 5KHZ - I have raised this with Garrett.
>
> This is probably something I can fix in the module by determining the
> proper step for the frequency during import. I don't think this is
> something RepeaterBook needs to care about.
>
> --Dan
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nicolas at nicolas at jetblackjelly.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230116/d083b749/attachment.html