[chirp_users] uv5r plus corrupt img file

[Adrian Norcross]

Hello Jim,

Thanks very much for the info. i'll give that a try, I think I need to have
a good read through the documentation and have a few trial and error
sessions.

Adrian M1ZRP

On Sat, 25 Feb 2023 at 19:34, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sat, Feb 25, 2023 at 2:25 PM Adrian Norcross <adym1zrp at gmail.com>
> wrote:
> >
> > Hello Glen,
> > Thanks for your reply. There isn't an option for the plus model
> apparently the listed uv5r setting is correct.
> >
> When in doubt, check the Supported Radio Models list on the CHIRP home
> page. It shows...
>
> Baofeng/Pofung
> * UV-5R+ (use BF-F8HP)
>
> The rule of thumb for UV-5R like models is...
>
> 2 bands, 2 TX power levels: Baofeng / UV-5R
> 2 bands, 3 TX power levels: Baofeng / BF-F8HP
> 3 bands, 2 TX power levels: Radioddity / UV-5RX3
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Adrian at adym1zrp at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230225/c0271140/attachment.html