[chirp_users] FTM-3100R

[W Paul Mills]

I don't have a FTM-3100 and am not a developer.

Looking in the browser tab root -> memory[199][0-13] -> unknown5 = 0x0
-> unknown 6 = 0x0
and root -> memory[199][14-198] -> unknown5 = 0x3
-> unknown6 = 0x1

It also looks like Chirp has not implemented programming the priority 
channel.

Looks like a bug report may be in order.

On 8/6/23 20:40, Andy Zaayenga via chirp_users wrote:
> Hi folks,
>
> I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to
> run with CHIRP.  I downloaded the radio using the FTM-3200D R template as
> per the CHIRP home page. Downloading and uploading works fine.
>
> I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor
> that are covered by the FTM-3100R. Uploading those to the radio works fine
> and downloading shows them all in memory.
>
> However, I notice that when I scan all 63 frequencies the radio only scans
> the first 14. The display just stops on the 14th location while the numbers
> under MR keep counting up to 63. Then it cycles back to location 1.  I have
> the radios side by side and the FT-60R scans all the locations while the
> FTM-3100R only the first 14.
>
> The specs say the radio has 199 memory locations which is consistent with
> the CHIRP img
> * 199 "basic" memory channels, numbered "1" through "199".
>
> But the CHIRP image doesn't show the home channel or any of the L or U
> locations.
> * A "Home" channel, providing storage and quick recall of one prime
> frequency.
> * 10 sets of band-edge memories, also known as "Programmable Memory Scan"
> channels, labeled "L0/U0" through "L9/U9".
>
> Does anyone out there have an FTM-3100R and can let me know if I'm doing
> something wrong? I'm wondering if there's some issue with the FTM-3200D R
> template WRT the FTM-3100R.
>
> Thanks from a first-time poster!
>
> 73
> Andy Zaayenga
> KD2SME
> Yaesu FT-60R, Yaesu FTM-3100R
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Paul AC0HY at ac0hy at wpmills.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com


-- 
/**************************************************
* Amateur Radio Station AC0HY                     *
* W. Paul Mills         SN807                     *
* Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
* President Kaw Valley Amateur Radio Club         *
**************************************************/