[chirp_users] Linux and chirp

[Cinaed Simson]

Oops - I noticed in my last mesage

   ttyUSB0

was clipped to

   tty

after the cut and paste.

-- Cinaed

On 10/28/22 18:46, Cinaed Simson wrote:
> Hi Julian - when I plug mine into my machine running Linux i get a 
> different converter
>
>   FTDI USB Serial Device converter detected
>
> instead of the
>
>  pl2303
>
> You might have the wrong cable.
>
> This is the cable I purchased for mine
>
> https://www.amazon.com/gp/product/B00HUB0ONK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
>
> -- Cinaed
>
>
>
> [2309548.225049] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter 
> detected
> [2309548.226448] usb 1-1.1: Detected FT232RL
> [2309548.230334] usb 1-1.1: Number of endpoints 2
> [2309548.235250] usb 1-1.1: Endpoint 1 MaxPacketSize 64
> [2309548.239657] usb 1-1.1: Endpoint 2 MaxPacketSize 64
> [2309548.244912] usb 1-1.1: Setting MaxPacketSize 64
> [2309548.249847] usb 1-1.1: FTDI USB Serial Device converter now 
> attached to tty
>
> On 10/28/22 10:27, Julian Macassey wrote:
>> Oct 28 18:07:10 localhost kernel: [218263.636611] usb 3-4: new 
>> full-speed USB device number 15 using xhci_hcd
>> Oct 28 18:07:11 localhost kernel: [218264.061760] usb 3-4: New USB 
>> device found, idVendor=067b, idProduct=2303, bcdDevice= 3.00
>> Oct 28 18:07:11 localhost kernel: [218264.061769] usb 3-4: New USB 
>> device strings: Mfr=1, Product=2, SerialNumber=0
>> Oct 28 18:07:11 localhost kernel: [218264.061772] usb 3-4: Product: 
>> USB-Serial Controller
>> Oct 28 18:07:11 localhost kernel: [218264.061775] usb 3-4: 
>> Manufacturer: Prolific Technology Inc.
>> Oct 28 18:07:11 localhost kernel: [218264.064089] pl2303 3-4:1.0: 
>> pl2303 converter detected
>> Oct 28 18:07:11 localhost kernel: [218264.066251] usb 3-4: pl2303 
>> converter now attached to ttyUSB0
>> Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: 
>> "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"
>> Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an 
>> MTP device
>> Oct 28 18:07:11 localhost snapd[13154]: hotplug.go:200: hotplug 
>> device add event ignored, enable experimental.hotplug
>> Oct 28 18:07:11 localhost mtp-probe: checking bus 3, device 15: 
>> "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4"
>> Oct 28 18:07:11 localhost mtp-probe: bus: 3, device: 15 was not an 
>> MTP device
>> Oct 28 18:07:13 localhost ModemManager[824]: <info> [base-manager] 
>> couldn't check support for device 
>> '/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4': not supported by any 
>> plugin
>