[chirp_users] Programming A Baofeng For The ISS

[Freddie Pack]

I’m not sure if a started this thread or if I was added to it- my question
was how to get chirp to work on Monterey OS, so far I have not been able to
make it work-

On Tue, Jul 19, 2022 at 7:48 AM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Tue, Jul 19, 2022 at 1:03 AM K0LNY_Glenn <glenn at ervin.email> wrote:
> >
> > Hi,
> > I am planning on putting in the voice downlink and uplink for the
> > International Space Station into my Baofeng.
> > The downlink is in the 7Cm band and the uplink is in the 2 M band.
> > Typically in Chirp I enter a normal offset, plus or minus.
> > How do I do this in Chirp to cover such a difference in frequency?
> > . Downlink 437.800MHz FM; Doppler +-10KHz
> > . Uplink 145.990MHz FM  with 67.0 Hz PL
> >
> > Thanks.
> >
> > Glenn
>
> Hi Glenn,
>
> For radios that support "split" (most Baofeng dual-band radios do),
> what you do is set Duplex to "split" and then set Offset to the
> absolute TX frequency. See the Offset field of the Understanding
> CHIRP's Columns guide in the CHIRP documentation area.
>
> https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
>
> Here is how it should look in the spreadsheet style Memory Editor.
>
> Frequency: 437.800000
> Tone Mode: Tone
> Tone: 67.0
> Duplex: split
> Offset: 145.990000
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to fred packwood at freddiepack59 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220719/504f61bd/attachment.html