[chirp_users] Error comport

[Al Jones]

Open device manager and look under comm ports.  That should tell you 
which chip is in the cable you're using, but more importantly what port 
it's on.

If you've done this already - you don't say - then check and make sure 
you have the correct UV-82 selected.
//al


------ Original Message ------
>From "D Bunk" <w3jfr01 at gmail.com>
To chirp_users at intrepid.danplanet.com
Date Mon 12 19 22 17:56:21
Subject [chirp_users] Error comport

>
>I have a brand new baofeng UV-82 but can not get the program to 
>recognize it. I keep getting an error message “can not open port”. I 
>have downloaded the lasted version of the program. Any ideas? Using 
>windows 10 on pc.
>
>/r
>Dean
>
>/r
>Dean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20221220/b0779c59/attachment.html