[chirp_users] confirm 7742568011fbca21b483239483f2960577634da1
Herb Gerhardt
Sun May 30 13:47:42 PDT 2021
I would suspect that the offset, puts it outside its allowed frequency operating range. There is a setting where you specify the transmitting limits but have not done it in years, so don’t remember which setting. I suggest you check that setting for the operating range and adjust it as required.
I have one of the old Part 90 units and it works just fine in all ham and commercial frequencies but am not sure if I had to open the transmitting band first. I probably did but just don’t remember.
Herb
KB7UVC
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of babj615
Sent: Sunday, May 30, 2021 1:22 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] confirm 7742568011fbca21b483239483f2960577634da1
May be related to this: "Compared with other classic series from BAOFENG, this is a 100% legal version with the compliant transmit range and spurious emission, complies with FCC Equipment Rule Part15B and Part90."
Possible helpful YouTube video: https://www.youtube.com/watch?v=XQ_JzivmjyI
On Sun, May 30, 2021 at 12:07 PM Steve Horning <n0xvz.1 at gmail.com> wrote:
Hello,
First, I'm not sure if I've missed something in my research, so I
apologize if I'm asking an obvious question.
I recently purchased a Baofeng GT-5R and tried to program it with
Chirp. What I've noticed is that whether I import repeater settings or
input them manually, Chirp is not saving the offsets. Instead, it's
listing all of them as "off". I have used Chirp to program a UV-5R
without any problems. I can enter repeater information manually, but if
I download the data from the radio, the offsets also reset to "off".
Thanks for your suggestions.
73,
Steve, N0XVZ
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to babj615 at gmail.com at babj615 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
--
///Andy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210530/e83e16c5/attachment.html
More information about the chirp_users
mailing list