[chirp_users] FT-70D Port for Mac

[Lawrence Underwood]

Do you know where I can download a driver?  Is it a FTDI cable or some sort?



> On Mar 26, 2021, at 7:54 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu at gmail.com> wrote:
>> 
>> I am on a MacBook Pro 13 running 11.2.3.
>> 
>> When I attempt to download the radio to Chirp the port that is auto populated is /dev/cu/.Bluetooth-Incoming-Port.
>> When I put the radio into ADMS mode and attempt to download it I get ‘ERROR’ on the radio and a message stating that the radio did not respond on Chirp.  I am using the cable supplied by Yaesu.
>> 
>> Any ideas on how to get the radio to communicate with Chirp?
>> 
>> Thanks.
> 
> You do not have a driver installed that is compatible with the chip in
> your programming cable. When you choose the "Port", you will not
> select anything that has "bluetooth" in the description.
> 
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Lawrence at lawrenceu at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com