[chirp_users] FT-70D Port for Mac

[Jim Unroe]

On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu at gmail.com> wrote:
>
> I am on a MacBook Pro 13 running 11.2.3.
>
> When I attempt to download the radio to Chirp the port that is auto populated is /dev/cu/.Bluetooth-Incoming-Port.
> When I put the radio into ADMS mode and attempt to download it I get ‘ERROR’ on the radio and a message stating that the radio did not respond on Chirp.  I am using the cable supplied by Yaesu.
>
> Any ideas on how to get the radio to communicate with Chirp?
>
> Thanks.

You do not have a driver installed that is compatible with the chip in
your programming cable. When you choose the "Port", you will not
select anything that has "bluetooth" in the description.

Jim KC9HI