[chirp_users] Help with Programming Rugged Radios RM-60

[John Wuest]

Your radio is not on the supported makes/models list. You may be able to
get software from the seller.

On Wed, Mar 17, 2021 at 2:49 AM Luis Tiscareno <jayspinnin at gmail.com> wrote:

> searched the site and scoured google, but came up with nothing. Apologies
> in advance for my lack of knowledge
>
> Equipment:
> Windows 10 64bit
> Prolific USB to 3.5mm Cable running 3.2.0.0 Driver (as instructed by
> MIKLOR), correct identified port
> Rugged Radios RM60
>
> Issue: Need to Program Radio with Chirp. Radio is not listed on Chirp
> site. I tried selecting other radios such as TYT or QYT as others had used,
> but software will say 'Radio did not enter clone mode' or radio not
> recognized, or something along those lines.
>
> What am I missing? wrong cable/driver? incorrect radio being selected in
> Chirp? setting on radio? Do i have to use RT system's software and/or cable?
>
> Thanks for any help you can provide.
>
> Luis
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John Wuest at jhwuest at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210317/c2d61f4f/attachment.html