[chirp_users] Download problem

[Nigel A. Gunn G8IFF/W8IFF]

Please read previous posts. This get's asked and answered nearly every day.

> On 06/06/2021 23:01 Gerald Stein <nv7gs1 at gmail.com> wrote:
> 
>  
> I’m new to Chirp software. The equipment I’m using is a Yaesu FT 60 and a windows 10 laptop. I acquired the cable sometime ago, but haven’t used it until recently. The build I am using is the most recent available. Here’s the problem: I connected the radio to the laptop and uploaded the radio’s contents without problem. I made some changes to the repeaters listed, saved the changes,  and then tried to download them back to the radio. The download started normally, but quickly the following error message appeared: “failed to communicate with radio: radio did not respond.” Any suggestions?
> 
> Thanks and advance for your efforts.
> 
> Jerry
> NV7GS 
> +++++
> Give a person a fish and you feed them for a day. Teach a person to use the Internet and they won't bother you for weeks, months, maybe years.
> 
> ~Unknown
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net