[chirp_users] USB cable help

[Glenn K0LNY]

Sounds like your cable may not be making a connection into the radio.
You have to sometimes press really hard against the radio, and some people have to trim some of the rubber block off in order for it to go all the way into the radio.
I would start by shaving the corners around the block at a 45° so it seats deeper into the radio area.
Glenn
----- Original Message ----- 
From: Marc Danziger 
To: chirp_users at intrepid.danplanet.com 
Sent: Tuesday, January 19, 2021 2:58 PM
Subject: [chirp_users] USB cable help


I've tried the various drivers I can find online, but neither Chirp nor the Baofeng app can seem to establish communication...

Is there a robust FAQ somewhere on this or someone who can guide me through??




Marc - ham in waiting 


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210119/eab57b28/attachment.html