[chirp_users] Chirp no work

[Glenn K0LNY]

Hi Billy Joe,
Have you confirmed in Windows device manager that it is the com port 
addressed to the cable?
You can open device manager and pull the cable and see if it disappears.
If that is the case, you may need to roll back the driver to the proper 
prolific driver.
Did your cable come with a driver?
Otherwise, sometimes you have to push really hard to ensure that it is 
plugged into the radio all the way.

Glenn
----- Original Message ----- 
From: "Billy Joe Higginbotham Jr via chirp_users" 
<chirp_users at intrepid.danplanet.com>
To: <chirp_users at intrepid.danplanet.com>
Sent: Tuesday, January 05, 2021 12:06 PM
Subject: [chirp_users] Chirp no work


I can’t get my radio to link with my computer. I have the uv-5r and run 
Windows 7 on my computer. I keep get the message (An error has occurred 
could not open port [Error 2] The system cannot find the file specified.) It 
like the Chirp can’t see my radio.

Sent from Billy’s IPhone
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com