[chirp_users] chirp_users Digest, Vol 152, Issue 12

Fri Aug 27 08:13:52 PDT 2021

It's an unanswered request from 8 years ago, and two duplicate requests were rejected a year later.

It doesn't look like it's likely to happen - I don't see a request for a loaner radio, that a developer is going to take a look into what's involved, etc. AFAIK the FT-270 wasn't a big seller (compared to, say, the FT-60R) or the many permutations of Baofeng radios.

Ken, N2VIP

> On Aug 27, 2021, at 08:42, Martin Cooper <mfncooper at gmail.com> wrote:
> 
> 
> No need. There's already an issue for this radio:
> 
> https://chirp.danplanet.com/issues/1099
> 
> Martin.
> KD6YAM
> 
>> On Fri, Aug 27, 2021 at 4:27 AM Tony Ling <tonyg7txu at gmail.com> wrote:
>> You can raise is as an issue under new model here
>> https://chirp.danplanet.com/projects/chirp/issues/new
>> Tony G7TXU
>> 
>>> On Fri, 27 Aug 2021 at 00:26, Ken Hansen <ken at n2vip.org> wrote:
>>> I suspect as soon as someone loans/donates a radio to a CHIRP programmer to work on support.
>>> 
>>> Ken
>>> 
>>>>> On Aug 26, 2021, at 18:10, Eric Chopin <echopin27 at gmail.com> wrote:
>>>>> 
>>>> 
>>>> Yaesu FT270 H/H
>>>> 
>>>> Greetings, so far I have used CHIRP with 100% success in programming many radios.
>>>> What I REALLY need is being able to program the YAESU FT270 Hand Held.
>>>> When is one of you brilliant guys going to update CHIRP with this radio?
>>>> 
>>>> Thanks
>>>> VE7ECJ
>>>> 
>>>>> On Sun, Aug 22, 2021 at 12:01 PM <chirp_users-request at intrepid.danplanet.com> wrote:
>>>>> Send chirp_users mailing list submissions to
>>>>>         chirp_users at intrepid.danplanet.com
>>>>> 
>>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> or, via email, send a message with subject or body 'help' to
>>>>>         chirp_users-request at intrepid.danplanet.com
>>>>> 
>>>>> You can reach the person managing the list at
>>>>>         chirp_users-owner at intrepid.danplanet.com
>>>>> 
>>>>> When replying, please edit your Subject line so it is more specific
>>>>> than "Re: Contents of chirp_users digest..."
>>>>> 
>>>>> 
>>>>> Today's Topics:
>>>>> 
>>>>>    1. Re: UV5X Programming issue (White Ranger)
>>>>> 
>>>>> 
>>>>> ----------------------------------------------------------------------
>>>>> 
>>>>> Message: 1
>>>>> Date: Sat, 21 Aug 2021 14:33:09 -0500
>>>>> From: White Ranger <cortchubby20007 at gmail.com>
>>>>> Subject: Re: [chirp_users] UV5X Programming issue
>>>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>>>> Message-ID:
>>>>>         <CAP+N95FGwe=VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q at mail.gmail.com>
>>>>> Content-Type: text/plain; charset="utf-8"
>>>>> 
>>>>> Radio should be ON when up or downloading.
>>>>> Remove the driver and cable program, reboot PC reload driver
>>>>> SHOULD correct issue. If using aftermarket cable check to see contacts are
>>>>> CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic
>>>>> jack) DO NOT touch ANY buttons while programming. Worst case, prior to
>>>>> programming RESET the radio to factory resets then load your amended
>>>>> program.
>>>>> 
>>>>> On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <rock.unroe at gmail.com> wrote:
>>>>> 
>>>>> > Hi Eric,
>>>>> >
>>>>> > On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <echopin27 at gmail.com> wrote:
>>>>> > >
>>>>> > > UV5XP....
>>>>> > >     However to get CHIRP to see the radio either in the 'Download from
>>>>> > radio'
>>>>> > >     or 'Upload to radio' ... with the cable plugged in to my PC or my
>>>>> > MAC, the
>>>>> > >     radio must me switched OFF...then as I select 'Download or upload'
>>>>> > as I
>>>>> > >     select 'OK' i must immediately switch ON my radio then CHIRP sees it
>>>>> > and
>>>>> > >     proceeds. If I try to 'Download or upload' with the radio already
>>>>> > switched
>>>>> > >     on I get the message 'The radio did not respond' as CHIRP cannot see
>>>>> > it
>>>>> > >     connected.
>>>>> > >     Any suggestions?
>>>>> > >     Thanks
>>>>> > >     VE7ECJ
>>>>> >
>>>>> > That sounds like a programming cable/driver issue. Also, to program
>>>>> > that radio you must choose...
>>>>> >
>>>>> > Vendor: Radioddity
>>>>> > Model: UV-5G
>>>>> >
>>>>> > Jim KC9HI
>>>>> > _______________________________________________
>>>>> > chirp_users mailing list
>>>>> > chirp_users at intrepid.danplanet.com
>>>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> > This message was sent to cortchubby20007 at gmail.com at
>>>>> > cortchubby20007 at gmail.com
>>>>> > To unsubscribe, send an email to
>>>>> > chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> >
>>>>> -------------- next part --------------
>>>>> An HTML attachment was scrubbed...
>>>>> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html 
>>>>> 
>>>>> ------------------------------
>>>>> 
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>> 
>>>>> End of chirp_users Digest, Vol 152, Issue 12
>>>>> ********************************************
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to Ken Hansen at ken at n2vip.org
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Tony Ling at tonyg7txu at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Martin Cooper at mfncooper at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken Hansen at ken at n2vip.org
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210827/ab9e6e51/attachment.html 