[chirp_users] chirp_users Digest, Vol 152, Issue 12

[Martin Cooper]

No need. There's already an issue for this radio:

https://chirp.danplanet.com/issues/1099

Martin.
KD6YAM

On Fri, Aug 27, 2021 at 4:27 AM Tony Ling <tonyg7txu at gmail.com> wrote:

> You can raise is as an issue under new model here
> https://chirp.danplanet.com/projects/chirp/issues/new
> Tony G7TXU
>
> On Fri, 27 Aug 2021 at 00:26, Ken Hansen <ken at n2vip.org> wrote:
>
>> I suspect as soon as someone loans/donates a radio to a CHIRP programmer
>> to work on support.
>>
>> Ken
>>
>> On Aug 26, 2021, at 18:10, Eric Chopin <echopin27 at gmail.com> wrote:
>>
>> 
>> Yaesu FT270 H/H
>>
>> Greetings, so far I have used CHIRP with 100% success in programming many
>> radios.
>> What I REALLY need is being able to program the YAESU FT270 Hand Held.
>> When is one of you brilliant guys going to update CHIRP with this radio?
>>
>> Thanks
>> VE7ECJ
>>
>> On Sun, Aug 22, 2021 at 12:01 PM <
>> chirp_users-request at intrepid.danplanet.com> wrote:
>>
>>> Send chirp_users mailing list submissions to
>>>         chirp_users at intrepid.danplanet.com
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> or, via email, send a message with subject or body 'help' to
>>>         chirp_users-request at intrepid.danplanet.com
>>>
>>> You can reach the person managing the list at
>>>         chirp_users-owner at intrepid.danplanet.com
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of chirp_users digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>>    1. Re: UV5X Programming issue (White Ranger)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Sat, 21 Aug 2021 14:33:09 -0500
>>> From: White Ranger <cortchubby20007 at gmail.com>
>>> Subject: Re: [chirp_users] UV5X Programming issue
>>> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>> Message-ID:
>>>         <CAP+N95FGwe=
>>> VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q at mail.gmail.com>
>>> Content-Type: text/plain; charset="utf-8"
>>>
>>> Radio should be ON when up or downloading.
>>> Remove the driver and cable program, reboot PC reload driver
>>> SHOULD correct issue. If using aftermarket cable check to see contacts
>>> are
>>> CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic
>>> jack) DO NOT touch ANY buttons while programming. Worst case, prior to
>>> programming RESET the radio to factory resets then load your amended
>>> program.
>>>
>>> On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe <rock.unroe at gmail.com> wrote:
>>>
>>> > Hi Eric,
>>> >
>>> > On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin <echopin27 at gmail.com>
>>> wrote:
>>> > >
>>> > > UV5XP....
>>> > >     However to get CHIRP to see the radio either in the 'Download
>>> from
>>> > radio'
>>> > >     or 'Upload to radio' ... with the cable plugged in to my PC or my
>>> > MAC, the
>>> > >     radio must me switched OFF...then as I select 'Download or
>>> upload'
>>> > as I
>>> > >     select 'OK' i must immediately switch ON my radio then CHIRP
>>> sees it
>>> > and
>>> > >     proceeds. If I try to 'Download or upload' with the radio already
>>> > switched
>>> > >     on I get the message 'The radio did not respond' as CHIRP cannot
>>> see
>>> > it
>>> > >     connected.
>>> > >     Any suggestions?
>>> > >     Thanks
>>> > >     VE7ECJ
>>> >
>>> > That sounds like a programming cable/driver issue. Also, to program
>>> > that radio you must choose...
>>> >
>>> > Vendor: Radioddity
>>> > Model: UV-5G
>>> >
>>> > Jim KC9HI
>>> > _______________________________________________
>>> > chirp_users mailing list
>>> > chirp_users at intrepid.danplanet.com
>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> > This message was sent to cortchubby20007 at gmail.com at
>>> > cortchubby20007 at gmail.com
>>> > To unsubscribe, send an email to
>>> > chirp_users-unsubscribe at intrepid.danplanet.com
>>> >
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:
>>> http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210821/b544e8b4/attachment-0001.html
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>> End of chirp_users Digest, Vol 152, Issue 12
>>> ********************************************
>>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ken Hansen at ken at n2vip.org
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Tony Ling at tonyg7txu at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Martin Cooper at mfncooper at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210827/787fec87/attachment.html