[chirp_users] Motorola CDM

[VA7OTC John Erskine]

On 2021-03-29 12:55, Robert Carlson wrote:
> I have programming software for my various amateur radio equipment as
> well as specific Motorola software. I was directed here because I need
> to drop the frequency range on a cdm1550 by 2 MHz all the top of the
> bottom. From what I have read There is a waris.py file somewhere
> available for download did enables chirp to work with a Motorola? I am
> confused on the matter. I've read the offsets that need to be changed
> with a hex editor and if that's all I need to do then I suppose that
> will work. On the other hand, I'd love to support chirp financially if
> it can handle all of my various pieces of equipment from one piece of
> software. Or am I misunderstanding that I still need my RSS software
> or CPS software?
> 
> Thank you in advance.

You may find some useful info at http://www.repeater-builder.com/

See the Motorola page. There are two likely links from there, one has 
the most focus, with various manuals and at least a page on 
modifications.

73, John
-- 
J.D. Erskine
VA7OTC/VE0JD
Victoria, BC