[chirp_users] Yaesu FT 8900r

[Nigel A. Gunn G8IFF/W8IFF]

Correct device driver for your cable.

>     On 14/09/2020 18:05 joe <joe at joeshapley.com> wrote:
>      
>      
>     Windows 10
>     Yaesu FT 8900r
>     First time attempting to clone
>      
>     After selecting com port, hitting OK and following the instructions, I press the left V/M button and I get this message:
>      
>     An error has occurred Failed to communicate with radio: Failed to read header (0)
>      
>     Any help and assistance will be greatly appreciated
>      
>     78,
>      
>     Joe
>     _______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 


Nigel A. Gunn, ///shoulders.outwards.resolutions   tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200914/e420757d/attachment.html