[chirp_users] Yaesu FT8900R Cloning

[D.J.J. Ring, Jr.]

You have to select the USB port that your radio is connected to.

73

DR

On Mon, Sep 7, 2020 at 5:28 PM joe <joe at joeshapley.com> wrote:

> Hi everyone,
>
> Windows 10 computer
>
> I am trying to clone the Yaesu FT8900R (this is the first time)
>
> I use CHIRP and I follow the CHIRP instructions (same as in Yaesu manual)
>
> I turn on the radio, go to F6 "clone start", then push "set"
>
> Nothing happens...after a few seconds, I get error message stating it
> could not find the item location (com port).  Tried several times on all
> four active ports.
>
> Checked "device manager" and the four ports are active and well
>
> Any help or suggestions will be greatly appreciated
>
> Joe
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200907/33463bb9/attachment.html