[chirp_users] Setting CIRP to display name

[Harold Gray]

Aha!  Thank you.

On Tue, Nov 17, 2020, 2:38 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> Hi Harold,
>
> On Tue, Nov 17, 2020 at 3:23 PM Harold Gray <hlgray14 at gmail.com> wrote:
> >
> > My radio is Baofenf UV-5R.  I am learning to use chirp.
> > That why I'm puzzled.  I used CHIRP to program my radio and I did tell
> it to display frequency on A, and name on B.  I got unexpected results in
> that B seems to be locked on 70CM CA the call frequency.
> >
>
> This is because the top (A) and bottom (B) display lines are
> independent. They are not, and can not be, automatically synchronized.
>
> If the top display line is selected (black triangle to the left),
> scrolling through the channels only occurs on the A display line. You
> have to tap the [A/B] button to select the bottom display line (black
> triangle to the left) to enable scrolling on the B display line.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Harold Gray at hlgray14 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201117/e5325748/attachment.html