[chirp_users] Using Chirp to program the Yaesu FT-50r

[Richard Gordon]

I have an FT-50R and I am using the latest CHIRP release, CHIRP
daily-20200430. There is no need to press the PTT 3 times.
The instructions for the FT-50R are to hold the PTT and Knob while powering
on the radio. (The knob is on the top of the radio and must be pressed
down.) To clarify, press the PTT and the knob and then press the orange
power button. All three must be pressed at the same time.
The radio's display will read 'CLON'. From CHIRP select 'Radio' and
'Download from Radio' and then your port, 'Yaesu' and 'FT-50'. Click OK.
The instructions will pop-up if enabled. Click OK. Once CHIRP's cloning
dialog for the FT-50R is present on the screen, press the PTT once and the
radio should clone.
I hope this helps.
Rich Gordon
k0eb
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200510/2f0b9f15/attachment.html