[chirp_users] QYT-KT8900D

[Terry Hunt]

Thanks Jim, that would make since.  I appreciate the reply and confirmation.

Terry

________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe at gmail.com>
Sent: Saturday, March 7, 2020 10:32 AM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] QYT-KT8900D

On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <terry at mylakeroyale.com> wrote:
>
> I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success.  I have an 8900D that seems to program perfectly with one exception.  This radio has four monitor slots on the front panel.  When programming, the first two work great, number 3 and 4 however do not.  Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart.  Does anyone else have this issue?
>
> Thanks,
> Terry

Hi Terry,

This is a bug in the hardware that has been present since the first
units began shipping in 2017.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&amp;data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&amp;sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&amp;reserved=0
This message was sent to Terry at terry at mylakeroyale.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200307/79900924/attachment.html