[chirp_users] QYT-KT8900D

[Jim Unroe]

On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <terry at mylakeroyale.com> wrote:
>
> I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success.  I have an 8900D that seems to program perfectly with one exception.  This radio has four monitor slots on the front panel.  When programming, the first two work great, number 3 and 4 however do not.  Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart.  Does anyone else have this issue?
>
> Thanks,
> Terry

Hi Terry,

This is a bug in the hardware that has been present since the first
units began shipping in 2017.

Jim KC9HI