[chirp_users] Radioddity QB25

[Byron Boggs]

Someone asked what the MCU version of my radio was.  It is VC4104.

Sent from Byron Boggs
kc8ue at hotmail.com
________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe at gmail.com>
Sent: Wednesday, June 24, 2020 10:47:24 AM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Radioddity QB25

On Wed, Jun 24, 2020 at 10:05 AM Byron Boggs <kc8ue at hotmail.com> wrote:
>
> I once again contacted Radioddity Support.  He installed the factory software, set it up for me and then set up Chirp for me.  I have my radio programmed.
> He said to open the factory software first, then open Chirp as the Administrator and it works.  I does work.
>
> Sent from Byron Boggs
> kc8ue at hotmail.com

You don't need the factory software. The reason it works now is
because the CHIRP daily build that was issued a couple of days ago
added an additional MCU-Version (which is probably the one your radio
has - VC4114). Prior to that, your radio couldn't be identified. You
can verify this by looking at the following CHIRP setting...

Settings -> Other Settings -> Fingerprint: {MCU-version}

The MCU-Version is also displayed in the bottom status display area of
the factory programming software.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Byron at kc8ue at hotmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200624/5eaa24e1/attachment.html