[chirp_users] Baofeng GT-1 can read radio but cannot write

[wtforme]

Thank you. I finally got the factory software to work. I had to turn off
the U ART FIFO BUFFERS.

On Tue, Jun 23, 2020, 1:54 PM W Paul Mills <ac0hy at wpmills.com> wrote:

> Make absolutely sure that the cable is fully plugged into the radio. It is
> not unusual for them to not mate up well.
>
> On 6/20/20 11:37 PM, wtforme wrote:
>
>   I have the latest version of chirp installed. I am showing the Prolific
> driver on com 5 and have retrograded it to version 3.2.00. I know it is a
> cheap ass cable but what is baffling me is why I can read but not write.
>
> I am running Windows 10.
>
> I get the following error: Failed to send block to radio at 0000.
>
> Thanks for any hep
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Paul AC0HY at ac0hy at wpmills.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> --
> /**************************************************
> * Amateur Radio Station AC0HY                     *
> * W. Paul Mills         SN807                     *
> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
> * President Kaw Valley Amateur Radio Club         *
> **************************************************/
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Bob at wtforme at hotmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200623/e409ddf9/attachment.html