[chirp_users] Abbree AR-F3

[R G]

Thanks Gary, I managed to figure out what to do and I’m on my way...Thanks again for the FAST response!! ;}
Regards

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Gary A. Cox<mailto:garyacox at sbcglobal.net>
Sent: July 24, 2020 10:22 PM
To: Discussion of CHIRP<mailto:chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Abbree AR-F3

Well, good and bad news.
I have the CH340 USB Type cable and If I pull the plug on the cable I get the exact message as if I was trying to download with the radio on and plugged in.
I have a disk from badfeng it came with the cable and the diver is recognized by windows 10 but does not work.
We’re do I find the old driver to install?

Gary A Cox
Sent from my iPhone

> On Jul 24, 2020, at 11:59 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
>
> On Fri, Jul 24, 2020 at 2:46 PM Gary A. Cox <garyacox at sbcglobal.net> wrote:
>>
>> No, it’s a new baufang factory cable. But that doesn’t mean any thing.
>> I tried a generic cable and it gave a no response error.
>>
>> Gary A Cox
>> Sent from my iPhone
>>
>
> I'll be if you don't even attach the programming cable to the radio
> you get the same error. It is a programming cable problem and once you
> get it solved, the UV-82III selection will work.
>
> Are you running Windows? If it has a Prolific type USB-to-Serial chip,
> have you downloaded, installed and selected the older v3.2.0.0 device
> driver? If it is a WCH CH340/CH341 chip, have you downloaded and
> installed the WCH driver?
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Gary at garyacox at sbcglobal.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to METTLE at mettle777 at outlook.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200725/0b6ff858/attachment.html