[chirp_users] Trouble Importing Channels

[Glenn K0LNY]

Hi All,
Hoping someone here will be able to help.
Ubuntu 16.43, and I'm trying to import a CSV file that I have used on my Baofengs, onto a new radio.
It is a Wouxun KG UV 7D.
I selected the 6D in the radio list in the Chirp radio selection, since when looking for the manual at the Wouxun site, I contacted them looking for the manual and they suggested I use the 6D manual, because the only difference is the power.
So the 6D selection should work in Chirp, it would seem.
My radio is the 2 & 6 meter model.
One thing it says is that I have an error on line 74, and I looked at that with Libra Office and couldn't find any problem.
But it leaves out a local repeater channel that normally goes right into a Baofeng with Chirp, and it also left out the 6 meter channels I put in.
The channel numbers are there, but no values in the fields.
If anyone has any ideas, or can look over my CSV file, I would much appreciate it.

Thanks.

Glenn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200714/e2921ef8/attachment.html