[chirp_users] Having troubles
Nigel A. Gunn G8IFF/W8IFF
Wed Feb 26 15:42:40 PST 2020
sudo adduser yourname dialout
> On 26 February 2020 at 17:01 holmzieN2EXG via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>
> O K, Im logged in the terminal as superuser. What is the syntax for the command to add holmzie to the dialout?
>
>
>
> -----Original Message-----
> From: K 0 L N Y Glenn <glennervin at cableone.net>
> To: holmziep <holmziep at netscape.net>; Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Sent: Wed, Feb 26, 2020 3:48 pm
> Subject: Re: [chirp_users] Having troubles
>
> I would try sudo -s or sudo su in the terminal first, enter your username, and then do the dial out part, and log out and back in, and it should work.
> HTH.
> Glenn
>
> > > ----- Original Message -----
> > From: holmzieN2EXG via chirp_users mailto:chirp_users at intrepid.danplanet.com
> > To: chirp_users at intrepid.danplanet.com mailto:chirp_users at intrepid.danplanet.com
> > Sent: Wednesday, February 26, 2020 2:19 PM
> > Subject: [chirp_users] Having troubles
> >
> > Have the Yaesu 857 w/ oem serial cable, then a good FTDI Serial/usb adapter. Running Linux Mint 19.3.
> >
> > Got the dreaded error [Errno 13] could not open port /dev/ttyS0: [Errno 13] Permission denied: '/dev/ttyS0'
> >
> > Searched long and hard, Done everything, Dan and others say to do, carefully, no luck. Here's some commands and results:
> >
> > Pete, N2EXG
> >
> >
> > sudo gpasswd --add $holmzie dialout
> > gives me gpasswd: user 'dialout' does not exist
> >
> > Groups
> > holmzie adm cdrom sudo dip plugdev lpadmin sambashare
> >
> > sudo addgroup $holmzie dialout
> > addgroup: The group `dialout' already exists.
> >
> > usb-devices
> > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
> > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0403 ProdID=6001 Rev=04.00
> > S: Manufacturer=FTDI
> > S: Product=USB HS SERIAL CONVERTER
> > S: SerialNumber=FTDYUTIA
> > C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=44mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
> >
> > lsusb -v
> > Bus 003 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
> > Device Descriptor:
> > bLength 18
> > bDescriptorType 1
> > bcdUSB 1.10
> > bDeviceClass 0 (Defined at Interface level)
> > bDeviceSubClass 0
> > bDeviceProtocol 0
> > bMaxPacketSize0 8
> > idVendor 0x0403 Future Technology Devices International, Ltd
> > idProduct 0x6001 FT232 USB-Serial (UART) IC
> > bcdDevice 4.00
> > iManufacturer 1 FTDI
> > iProduct 2 USB HS SERIAL CONVERTER
> > iSerial 3 FTDYUTIA
> > bNumConfigurations 1
> > Configuration Descriptor:
> > bLength 9
> > bDescriptorType 2
> > wTotalLength 32
> > bNumInterfaces 1
> > bConfigurationValue 1
> > iConfiguration 0
> > bmAttributes 0xa0
> > (Bus Powered)
> > Remote Wakeup
> > MaxPower 44mA
> > Interface Descriptor:
> > bLength 9
> > bDescriptorType 4
> > bInterfaceNumber 0
> > bAlternateSetting 0
> > bNumEndpoints 2
> > bInterfaceClass 255 Vendor Specific Class
> > bInterfaceSubClass 255 Vendor Specific Subclass
> > bInterfaceProtocol 255 Vendor Specific Protocol
> > iInterface 2 USB HS SERIAL CONVERTER
> > Endpoint Descriptor:
> > bLength 7
> > bDescriptorType 5
> > bEndpointAddress 0x81 EP 1 IN
> > bmAttributes 2
> > Transfer Type Bulk
> > Synch Type None
> > Usage Type Data
> > wMaxPacketSize 0x0040 1x 64 bytes
> > bInterval 0
> > Endpoint Descriptor:
> > bLength 7
> > bDescriptorType 5
> > bEndpointAddress 0x02 EP 2 OUT
> > bmAttributes 2
> > Transfer Type Bulk
> > Synch Type None
> > Usage Type Data
> > wMaxPacketSize 0x0040 1x 64 bytes
> > bInterval 0
> > Device Status: 0x0000
> > (Bus Powered)
> >
> >
> > holmzie at holmzie-All-Series ~ $ cat /etc/group
> > root:x:0:
> > daemon:x:1:
> > bin:x:2:
> > sys:x:3:
> > adm:x:4:syslog,holmzie
> > tty:x:5:
> > disk:x:6:
> > lp:x:7:
> > mail:x:8:
> > news:x:9:
> > uucp:x:10:
> > man:x:12:
> > proxy:x:13:
> > kmem:x:15:
> > dialout:x:20:
> > fax:x:21:
> > voice:x:22:
> > cdrom:x:24:holmzie
> > floppy:x:25:
> > tape:x:26:
> > sudo:x:27:holmzie
> > audio:x:29:pulse
> > dip:x:30:holmzie
> > www-data:x:33:
> > backup:x:34:
> > operator:x:37:
> > list:x:38:
> > irc:x:39:
> > src:x:40:
> > gnats:x:41:
> > shadow:x:42:
> > utmp:x:43:
> > video:x:44:
> > sasl:x:45:
> > plugdev:x:46:holmzie
> > staff:x:50:
> > games:x:60:
> > users:x:100:
> > nogroup:x:65534:
> > systemd-journal:x:101:
> > systemd-network:x:102:
> > systemd-resolve:x:103:
> > input:x:104:
> > crontab:x:105:
> > syslog:x:106:
> > messagebus:x:107:
> > netdev:x:108:
> > mlocate:x:109:
> > ssl-cert:x:110:
> > uuidd:x:111:
> > avahi-autoipd:x:112:
> > ssh:x:113:
> > bluetooth:x:114:
> > lpadmin:x:115:holmzie
> > ntp:x:116:
> > lightdm:x:117:
> > nopasswdlogin:x:118:
> > rtkit:x:119:
> > scanner:x:120:saned
> > saned:x:121:
> > nm-openvpn:x:122:
> > avahi:x:123:
> > colord:x:124:
> > pulse:x:125:
> > pulse-access:x:126:
> > geoclue:x:127:
> > holmzie:x:1000:
> > sambashare:x:128:holmzie
> > mysql:x:129:
> >
> >
> >
> >
> > ---------------------------------------------
> >
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to Glenn at glennervin at cableone.net
> > To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> >
> > > _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20200226/b0af366e/attachment.html
More information about the chirp_users
mailing list