[chirp_users] Baofeng UV-82HP Previous solution (from frequency to channel mode switching) does not work

[Kevin Evans]

thank you!

On Sun, Dec 20, 2020 at 3:49 PM Jim Unroe <rock.unroe at gmail.com> wrote:

> On Sun, Dec 20, 2020 at 6:06 PM Kevin Evans <kevians2001 at gmail.com> wrote:
> >
> > That function was turned off.  It didn't work. So I was trying to get it
> to work.  Now it works.  Although I'm now having issues trying to upload
> all my frequencies
> >
>
> Ahhh... yes. VFO/MR switching is disabled from the factory. A side
> effect of the firmware being cloned from the UV-82C which requires
> preventing access to the VFO for FCC Part 90 compliance.
>
> You aren't trying to upload a CSV file directly into the UV-82HP, are
> you? You cannot directly upload a CSV file to any radio that is
> programmed by CHIRP using "clone mode". You must download from the
> radio, import the channels from the CSV file (or load the CSV file
> into a separate tab so you can copy-and-paste them into the tab from
> your radio) and then upload the tab from your radio back into your
> radio.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Kevin at kevians2001 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20201220/acc62190/attachment.html