[chirp_users] chirp_users Digest, Vol 127, Issue 10

William Thompson
Fri Sep 27 13:13:28 PDT 2019


Jim Unroe,

Just saw your response below to the UV-9 programming issue.  I do not have nor can locate the factory software or programming cable.  I was hoping someone had a same radio and figured out the Chirp combination to program.

73,
William

________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of chirp_users-request at intrepid.danplanet.com <chirp_users-request at intrepid.danplanet.com>
Sent: Wednesday, July 24, 2019 2:00 PM
To: chirp_users at intrepid.danplanet.com <chirp_users at intrepid.danplanet.com>
Subject: chirp_users Digest, Vol 127, Issue 10

Send chirp_users mailing list submissions to
        chirp_users at intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
        http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
        chirp_users-request at intrepid.danplanet.com

You can reach the person managing the list at
        chirp_users-owner at intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."


Today's Topics:

   1. Programming Baofeng UV-9 (William Thompson)
   2. Re: Programming Baofeng UV-9 (Doug Schafer)
   3. Re: Baofeng UV-82HP Programming Issues (MacOS Mojave 10.14.5)
      (Brennan Stanford)
   4. Re: Programming Baofeng UV-9 (Jim Unroe)


----------------------------------------------------------------------

Message: 1
Date: Tue, 23 Jul 2019 21:44:29 +0000
From: William Thompson <wthom1 at outlook.com>
Subject: [chirp_users] Programming Baofeng UV-9
To: "chirp_users at intrepid.danplanet.com"
        <chirp_users at intrepid.danplanet.com>
Message-ID:
        <DM6PR12MB377013C2F915C97E46C5589784C70 at DM6PR12MB3770.namprd12.prod.outlook.com>

Content-Type: text/plain; charset="iso-8859-1"

I'm helping a group program their new radios.  They have Baofeng UV-9, not 9R, but UV-9.  There are no manufacture labels except in the battery compartment.  It appears to be a UV-5R variant as it incorporates the Kenwood standard 2-pin plug and  a 5R spkr-mic works with the radio.  I'm using the same cable that I use with my 5R but the radio fails to respond to Chirp no matter what radio model I use in the Baofeng and BTECH listings.  Is there a preferred for this radio.  By the way, it doesn't show a firmware version on power-up.

73,
William
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190723/555d2fe4/attachment-0001.html

------------------------------

Message: 2
Date: Tue, 23 Jul 2019 16:28:49 -0700
From: Doug Schafer <schafer at pobox.com>
Subject: Re: [chirp_users] Programming Baofeng UV-9
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>,   William
        Thompson <wthom1 at outlook.com>
Message-ID: <fad60d1d-9fbe-b9a8-70f0-1e4a0b564bcf at pobox.com>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190723/5e64182f/attachment-0001.html

------------------------------

Message: 3
Date: Tue, 23 Jul 2019 21:47:34 -0400
From: Brennan Stanford <bjstanf at gmail.com>
Subject: Re: [chirp_users] Baofeng UV-82HP Programming Issues (MacOS
        Mojave 10.14.5)
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <EFB6ECEA-86E4-477D-9692-4C66184D2995 at gmail.com>
Content-Type: text/plain; charset="utf-8"

I got this radio off of Amazon, ended up buying a new one from Amazon and got it today. Looks like the problem was the radio. Had no problems programming the brand new radio. Amazon is swapping the original radio.



Brennan



From: <chirp_users-bounces at intrepid.danplanet.com> on behalf of David Wilson <n5vtd25 at gmail.com>
Reply-To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Date: Thursday, July 18, 2019 at 12:28 PM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] Baofeng UV-82HP Programming Issues (MacOS Mojave 10.14.5)



Friend got one on Amazon and was DOA, sending it back to Baofeng RMA.



Does the radio work with a factory reset. And programming thought the key pad, RX/TX?



David



On Thu, Jul 18, 2019, 10:52 AM Brennan Stanford <bjstanf at gmail.com> wrote:

I am having issues using CHIRP to program my brand new Baofeng UV-82HP. I have an FTDI cable and am using a Mac (MacOS Mojave 10.14.5) and CHIRP 7.13.2019. I have zero problems with downloading from and programming to my BF-F8HP, but the UV-82HP will not work. Every time I connect to the radio and attempt to do the original image download, the radio restarts itself, and then CHIRP then gives me ?Radio did not respond? error.



Brennan J. Stanford



office: 419.740.0513

mobile: 419.450.7290

email: bjstanf at gmail.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David at n5vtd25 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________ chirp_users mailing list chirp_users at intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Brennan Stanford at bjstanf at gmail.com To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190723/996161f3/attachment-0001.html

------------------------------

Message: 4
Date: Tue, 23 Jul 2019 22:27:48 -0400
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Programming Baofeng UV-9
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CADnO8U7jzHxEWwuaVJ4cTBy+UKrH4hyfdrd53JiG1u0UtQW4Dw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

On Tue, Jul 23, 2019 at 7:30 PM Doug Schafer <schafer at pobox.com> wrote:
>
> I programmed a UV-9R Plus using CHIRP and selecting the Baofeng UV-82WP model.
>
> On 7/23/2019 2:44 PM, William Thompson wrote:
>
> I'm helping a group program their new radios.  They have Baofeng UV-9, not 9R, but UV-9.  There are no manufacture labels except in the battery compartment.  It appears to be a UV-5R variant as it incorporates the Kenwood standard 2-pin plug and  a 5R spkr-mic works with the radio.  I'm using the same cable that I use with my 5R but the radio fails to respond to Chirp no matter what radio model I use in the Baofeng and BTECH listings.  Is there a preferred for this radio.  By the way, it doesn't show a firmware version on power-up.
>
> 73,
> William
>

Does it program with the factory software?

Jim KC9HI


------------------------------

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

End of chirp_users Digest, Vol 127, Issue 10
********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190927/4847629c/attachment.html 


More information about the chirp_users mailing list