[chirp_users] HELP!

[Chance Fulton]

I might have a Mac around here somewhere, I can try to boot it and see what
it is supposed to say.

On Sat, Sep 7, 2019 at 9:02 AM Ted Smith <info at pikespeakparagliding.com>
wrote:

> Thanks for all the feedback.
> I did open the Terminal and entered the sudo dmesg command.
> This is what returned: PL-2303/X V1.5.0 start, Prolific
>
> As I know nothing about Terminal stuff. This looks to me like it detected
> the driver, but I don’t see any node stuff going on there.
> What now?
> Thanks,
> -Ted
>
> On Sep 6, 2019, at 5:59 AM, Chance Fulton <chance.fulton at gmail.com> wrote:
>
> I'm thinking it's simpler than Apple messing with the driver. Have you
> tried using the commandline to check what is printed when you plug in the
> cable?
>
> unplug the cable, open terminal and type
>
> sudo dmesg
>
> plug the cable back in, and type the same again.
>
> It should tell you the cable was detected, the driver was loaded, and what
> /dev node it's associated with.
>
> IF you don't get a node name, then you can start barking up the driver
> tree.
>
>
> On Thu, Sep 5, 2019 at 10:23 PM Jim Unroe <rock.unroe at gmail.com> wrote:
> On Thu, Sep 5, 2019 at 9:58 PM Ted Smith <info at pikespeakparagliding.com>
> wrote:
> >
> >
> >
> > Hi,
> > You guys probably get this all the time, but now it’s my turn.
> > I have been using CHIRP with my Baofeng radios for the past couple of
> years with no problem.
> > I recently had to upgrade my Mac OS to 10.11. Now I can’t get CHIRP to
> talk to my radios.
> > I assume it is because the drivers are wrong or something. I have tried
> downloading the Prolific drivers. No luck so far.
> > There used to be a pl2303 option on the drop down menu when I was
> uploading/ downloading. It isn’t there anymore.
> > I’m not sure what to do at this point.
> > Please help, I’m begging.
> > Thanks,
> > -Ted
>
> Hi Ted,
>
> My son-in-law gave me a MacBook Air a couple of months ago. I'm not a
> Mac user so I decided that my first project would be to see if I could
> get CHIRP running on it.
>
> Most of my programming cables were furnished with the radios so
> virtually every one of the freebies has a counterfeit USB-to-TTL chip
> in it. So I knew up front that using device driver from the Prolific
> website was out of the question. I also have a homebrew programming
> cable that has a Silicon Labs chip and a few programming cables with
> FTDI chips.
>
> So what I did was to purchase and install a 3rd party device driver
> from Repleo. It works for programming cables with Prolific PL2303
> chips, WCH CH341 chips and Silicon Labs CP2102 chips. They want 7.90
> euros for it which at the time I bought it came to $9.11 USD.
>
> https://www.mac-usb-serial.com/
>
> I used the native Apple driver for my programming cables with FTDI chips.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chance at chance.fulton at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> --
> Chance Fulton
> chance.fulton at gmail.com
> 810.441.5795
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> This message was sent to Ted Smith at info at pikespeakparagliding.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
>
>
>
>
>
>
> Ted Smith
> Pikes Peak Paragliding, LLC
> 2205 Charing Court
> <https://www.google.com/maps/search/2205+Charing+Court+Colorado+Springs,+CO+80919?entry=gmail&source=g>
> Colorado Springs, CO 80919
> <https://www.google.com/maps/search/2205+Charing+Court+Colorado+Springs,+CO+80919?entry=gmail&source=g>
> info at PikesPeakParaGliding.com <info at pikespeakparagliding.com>
> 719.761.1486
> EIN: 81-4065089
>
>
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chance at chance.fulton at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com

-- 
Chance Fulton
chance.fulton at gmail.com
810.441.5795
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190907/87ab1ffa/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PPPGlogoletterhead.jpg
Type: image/jpeg
Size: 34208 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190907/87ab1ffa/attachment.jpg