[chirp_users] VX-170 download but no upload

[Nigel A. Gunn G8IFF/W8IFF]

There is continual handshaking.

> On 06 September 2019 at 08:38 Michal Smialowski <mooksmd at gmail.com> wrote:
> 
>     I am able to download from the VX-170 but not upload.
>     I take it that the same "clone" mode is used for download and upload.
>     I note that the data for Rx and Tx go through the same pin on the 4 pin yaesu connector.
>     I assume that the Rx and Tx data alternate on the same line because it is shared.
>     Question: When uploading to the radio , does the software need to Tx and Rx to/from the PC to the radio or does it just Tx from PC to radio ? ie is there handshaking involved or just a steady transmit stream from the PC to the radio?
>     tnx
>     Mike VE7SML
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>     To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 


Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190906/f8f2d344/attachment.html