[chirp_users] Programming New BTECH GMRS-50X1

[Jim Unroe]

This is a known issue.

Jim KC9HI

On Fri, May 17, 2019, 10:58 PM David C. Jenner via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> I successfully programmed a new BTECH GMRS-50X1 using my older BTECH
> GMRS-V1 as a basis.
>
> However, it took 4 min and 30 sec to upload to the radio.  The first
> thing I did was read out the 50X1 and write back to it.  That upload and
> all since, with new entries, have taken about the same time, which seems
> excessively long?  I don't see this with other radios.
>
> Latest version of CHIRP on Windows 10 running on Parallels on a MacBook
> Pro using both BTECH and RT Systems cables.  Comm port says it's 9600 baud.
>
> Dave
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jim at rock.unroe at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190518/c7c1af58/attachment.html